Round 11M Steel Tubular Pole Gr50 material 3mm steel plate for
electric power transmission line
Application:
Tapered Tubular Substation Structures
Steel Substation Structures
Custom Substation Designs
Closed Section Tubes
I-Beam Structures
Lattice Structures
Steel Structures with Higher Translational Stiffness
Low Profile Aesthetically Pleasing Structures
Higher Terminal-Stop/Take Off Angles
Higher Tension Wires Due to Design
Substation Structures Exceed Wood Pole Standards
Technical Data Sheet
| series | Outside Diametar | Wall Thicness |
| mm | Min. | mm /SWG |
| 15 L | 21.3 | 2 |
| M | 2.6 |
| H | 3.2 |
| 20 L | 26.9 | 2.3 |
| M | 2.6 |
| H | 3.2 |
| 25 L | 33.7 | 2.6 |
| M | 3.2 |
| H | 4 |
| 32 L | 42.4 | 2.6 |
| M | 3.2 |
| H | 4 |
| 40 L | 48.3 | 2.9 |
| M | 3.2 |
| H | 4 |
| 50 L | 60.3 | 2.9 |
| M | 3.6 |
| H | 4.5 |
| 65 L | 76.1 | 3.2 |
| M | 3.6 |
| H | 4.5 |
| 80 L | 88.9 | 3.2 |
| M | 4 |
| H | 4.8 |
| 90 L | 101.6 | 3.6 |
| M | 4 |
| H | 4.8 |
| 100 L | 114.3 | 3.6 |
| M | 4.5 |
| H | 5.4 |
| 110 L | 127 | 4.5 |
| M | 4.8 |
| H | 5.4 |
| 125 L | 139.7 | 4.5 |
| M | 4.8 |
| H | 5.4 |
| 135 L | 152.4 | 4.5 |
| M | 4.8 |
| H | 5.4 |
| 150 L | 165.1 | 4.5 |
| M | 4.8 |
| H | 5.4 |
| 150 L | 168.3 | 4.5 |
| M | 4.8 |
| H1 | 5.4 |
| H2 | 6.3 |
Pole Design
Standard Accessory
-Top plate
-Base plate
-Bottom strip
-Standard hole
-Climbing rung
-Anchor bolt
-Bitumen protection
-Painted marking
-Removable ladder
Available Foundation Types
Direct Embedment
Anchor Bolt/Base Plate
Vibratory Steel Caisson
Here are some reasons why they made the switch from the wooden pole
to Steel Utility Pole:
Fabricated with uniform dimensions
Easy to install
Durable
Easy to maintain
Lower in life cycle costs
A solution to EPA regulations and deforestation issues
Superior in strength
Impervious to insects and rot
Free of toxic chemical treatments or hazardous waste concerns
100% recyclable
Tapered Tubular Substation Structures
Steel Substation Structures
Custom Substation Designs
Closed Section Tubes
I-Beam Structures
Lattice Structures
Steel Structures with Higher Translational Stiffness
More Pictures
Options:
• The Power Distribution Pole is available in various length,
diameters and hole arrangements.
• Multisided or Tapered round variations.
• The Power Distribution Pole covers Voltage between 10-220KV.
• The Power Distribution Pole includes: suspension pole, stain pole
and angle pole in different forms.
• Standard Corrosion Protection: hot dip galvanising (above and
in-ground)
• Additional in-ground protection is available for special
circumstances (soil condition). For example: Epoxy Coating.
• Pre-drilling for removable safety steps is available.
• Cross arms available.
Workshop
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located
in Wuxi,East of China ,near one of the largest sea port of China
,Shanghai,Port .
Our Company has 24 years experience on producing the steel poles
including the transmission power pole,street light pole,high mast
pole and so on.
We exported to oversea countries since 1991 and our products have
been delivered to more than 70 countries and areas ,including
America,Australia ,Russia ,Germany ,Span,Philippines
,Malaysia,Africa and so on.
We are the supplier of many big project in many countries,like the
street light pole of Dubai Tower.the high mast pole for Sochi
Winter Olympic Game and so on.
